CEMS - CEM SAFE
Emission
CEMS - CEM SAFE
Emission
- Solutions
- Emission
- CEMS - CEM SAFE
CEMS - CEM SAFE
Stay compliant and eco-conscious with comprehensive emission tracking and data-driven insights.
Online Flue Gas Analysis System for Continuous and Simultaneous Measurement of More than Four Parameters
Measurement Principles : | SO2, NO, CO, CH4: Non-Dispersive Infrared (NDIR)CO2: Dual beam NDIRO2: Electrochemical |
Component Minimum and Maximum Range : | SO2 0-200 ppm 0-5% NO 0-200 ppm 0-5% NO2 0-200 ppm 0-500 ppm CO 0-200 ppm 0-5% CH4 0-500 ppm 0-10% CO2 0-200 ppm 0-100% O2 0-5% 0-25% |
Accuracy : | SO2, NO, NO2, CO, CH4, CO2: 2% of Full Scale (FS) O2: 3% of FS |
Repeatability : | ≤ 1% FS |
Response Time (T90) : | 15 seconds (90% response from gas inlet) |
Sample Gas Flowmeter : | Built-in |
Ambient Temperature : | −5°C to 45°C |
Relative Humidity : | ≤ 95% (non-condensing) |
Structure : | Indoor type with steel case |
Mounting Method : | 19” rack mount, panel mount or desktop |
Power Supply : | 110 to 220 VAC, 50/60 Hz |
Dimensions : | 485 mm (L) x 415 mm (W) x 132 mm (H) |
Mass : | Approximately 18 kg |
Flow Rate : | 0.7 to 1.2 L/min |
Temperature : | 0 to 50°C |
Pressure : | 2 to 50 kPa |
Dust Particle Size : | 1 μm or smaller |
Notes : | Measurement range can be customised based on specific requirements. |
Modular design allows adding or upgrading components, enabling the system to adapt to future regulations or additional measurement needs. apable of measuring multiple parameters such as SO₂, NOx, CO, CO₂, dust (particulate matter), pressure, and temperature within a single integrated system provides a comprehensive solution for monitoring and managing emissions.
- There is a touch display that shows all the data from the field.
- It has a feature for remote diagnostics.
- It uses Modbus RS485 and RS232 for real-time data communication.
- It includes a gas flow meter and a needle valve to control the gas flow, plus an internal filter to keep the gas sensor clean.
- It has a built-in device to adjust for water vapour, which helps improve measurements, especially for SO₂ and NO.
- Centralizes all emission data, which helps operators maintain compliance and optimize processes in real time
- Monitoring industrial production processes.
- Checking the efficiency of industrial combustion.
- Monitoring the desulfurization process.
- Monitoring the denitration process.
- Monitoring industrial furnaces.
- Monitoring cement plants.
- Monitoring industrial coal-fired boilers.
- Checking process control functions.
- Monitoring the atmosphere during steel heat treatment.
- Monitoring incinerators.
Other Products
Solutions
Popular models high attention products from various segment
ONMS Noise Monitoring System Class -I
Real- time noise
monitoring with instant
data communication.
